YSE industrial model
Power-off brake motor: its straight disc flow brake is installed on the end cover of the non-shaft extension end of the motor. Conditions of use: the altitude does not exceed 1000 meters, the maximum ambient temperature does not exceed 40°C, and the minimum temperature does not exceed 40°C. at -15°C.
A new type of brake motor specially designed according to the working needs of the crane, suitable for: electric single girder, hoist double girder, gantry cr
length of work
Lightweight body
high temperature
The working principle of YSE series soft start brake motor (III generation) is that when the motor is connected to the power supply, the rectifier of the brake is connected to the power supply at the same time. When the cover is disengaged, the motor runs; when the power supply is cut off, the brake electromagnet loses its electromagnetic attraction, and the spring force pushes the armature to press the brake disc. Under the action of the friction torque, the motor stops running immediately.
This series of motor junction boxes are installed on the top of the motor, and the distance between the motor installation holes is the same. According to the installation requirements, the motor can be installed in a direction of 2~180°.
This series of motors has greatly reduced noise and vibration, and reached the advanced level. It is equipped with high-performance protection grade (IP54), which improves the insulation grade of the motor and increases the service life of the motor;
The design of this series of motors pays special attention to the appearance and appearance. The vertical and horizontal distribution of the heat dissipation ribs of the machine base, the end cover and the wiring hood are all improved designs, and the appearance is particularly beautiful.
Four advantages / outstanding features of YSE series:
Soft Start Walking without impact.
Great Starting Power Can work continuously for 8 hours.
Lightweight and energy efficient1/4 current start energy saving and environmental protection.
Practical Adapt to high temperature environment operation.
Soft start industrial version (G2)
Seat No. | Power | Voltage | Frequency | work system | Protection level | Insulation level |
80~100 | 0.4~1.5KW | 380v | 50HZ | S3 40% | IP54 | F |
Standard | Type | Power (D.KW) | Blocking Torque (D.N.M) | Stall current (D.A) | Rated Speed (r/min) | Brake Torque (N.M) | Flange Plate (Φ) | Mounting Port (Φ) |
Synchronous speed 15000r/min | ||||||||
YSE 71-4P | 0.4 | 4 | 2.8 | 1200 | 1-3 | 220P | Φ180 | |
0.5 | 5 | 3 | 1200 | |||||
0.8 | 8 | 3.6 | 1200 | |||||
YSE 80-4P | 0.4 | 4 | 2.8 | 1200 | 1-5 | 220P | Φ180 Φ130 | |
0.8 | 8 | 3.6 | 1200 | |||||
1.1 | 12 | 6.2 | 1200 | |||||
1.5 | 16 | 7.5 | 1200 | |||||
YSE100-4P | 2.2 | 24 | 10 | 1200 | 3-20 | 220P | Φ180 | |
3 | 30 | 12 | 1200 | |||||
4 | 40 | 17 | 1200 | |||||
Note: The above is the standard configuration for driving. If you have special working conditions, please select it separately. Level 6, Level 8, Level 12 | ||||||||
select configuration | hard boot | High Power | Different voltage | frequency conversion | special gear | Variable speed multi-speed | Non-standard | Encoder |