Three-phase asynchronous motor with aluminum casing. Wide range of uses: metal cutting machine tools, shakers, agricultural machinery, food machinery.
Aluminum machine body, beautiful and light in appearance, used to drive fans and pumps for long-term load operation.
Insulation level
work schedule
Protection level
Conditions of use:
| Ambient temperature | -15℃ ~40℃ | Elevation | Maximum 1000m | Rated Voltage | 380V, 400V, 415V | Rated Frequency | 50Hz, 60Hz |
| Work system | Continuous working system (S1) | Protection level | IP54/IP55 | Insulation class | Class B/Class F | cooling method | IC411 |
YE2/YE3 series three-phase asynchronous motors for R, S, F, K series reducers with hard tooth surface are specially designed motors by our company to meet the characteristics of reducers. The frame material is aluminum drawing and cast iron, and both the flange end structure and the bearing seat have been improved and adjusted. In the same model, it can be matched with a variety of flange covers to meet the requirements of different installation sizes. The I-shaped flange end cover is selected, the shaft is quenched and tempered, and the bearing grade is increased, which can improve the bearing capacity, increase the safety factor and the service life of the motor.
| Type | Rated power | Current | Speed | Efficiency | Power Factor | Locked-rotor current | Locked-rotor torque/Rated Torque | Pull-out torque/Rated Torque | Minimum torque/Rated Torque | Noise | |
| KW | KW | In(A) | r/min | η(%) | CosΦ | Rated current | Tst/TN | Tmax/TN | Tmax/TN | dB(A) | |
| Synchronous speed 3000（r/min） | |||||||||||
| 80M1-2 | 0.75 | 1 | 1.8 | 2840 | 77.4 | 0.82 | 6.8 | 2.3 | 2.3 | 1.5 | 64 |
| 80M2-2 | 1.1 | 1.5 | 2.53 | 2840 | 79.6 | 0.83 | 7.1 | 2.3 | 2.3 | 1.5 | 64 |
| 90S-2 | 1.5 | 2 | 3.34 | 2840 | 81.3 | 0.84 | 7.3 | 2.3 | 2.3 | 1.5 | 69 |
| 90L-2 | 2.2 | 3 | 4.73 | 2840 | 83.2 | 0.85 | 7.6 | 2.3 | 2.3 | 1.4 | 69 |
| 100L-2 | 3 | 4 | 6.19 | 2860 | 84.6 | 0.87 | 7.8 | 2.2 | 2.3 | 1.4 | 76 |
| 112M-2 | 4 | 5.5 | 8.05 | 2880 | 85.8 | 0.88 | 8.1 | 2.2 | 2.3 | 1.4 | 79 |
| 132S1-2 | 5.5 | 7.5 | 10.92 | 2910 | 87.0 | 0.88 | 8.2 | 2.2 | 2.3 | 1.2 | 81 |
| 132S2-2 | 7.5 | 10 | 14.53 | 2910 | 88.1 | 0.89 | 7.8 | 2.2 | 2.3 | 1.2 | 81 |
| 160M1-2 | 11 | 15 | 21.01 | 2920 | 89.4 | 0.89 | 7.9 | 2.2 | 2.3 | 1.2 | 83 |
| 160M2-2 | 15 | 20 | 28.36 | 2920 | 90.3 | 0.89 | 7.9 | 2.2 | 2.3 | 1.2 | 83 |
| 160L-2 | 18.5 | 25 | 34.74 | 2920 | 90.9 | 0.89 | 8.0 | 2.2 | 2.3 | 1.1 | 83 |
| 180M-2 | 22 | 30 | 41.1 | 2930 | 91.3 | 0.89 | 8.1 | 2.2 | 2.3 | 1.1 | 85 |
| 200L1-2 | 30 | 40 | 55.7 | 2940 | 92.0 | 0.89 | 7.5 | 2.0 | 2.3 | 1.1 | 86 |
| 200L2-2 | 37 | 50 | 68.3 | 2960 | 92.5 | 0.89 | 7.5 | 2.0 | 2.3 | 1.1 | 86 |
| 225M-2 | 45 | 60 | 82.7 | 2960 | 92.9 | 0.89 | 7.5 | 2.2 | 2.3 | 1.0 | 88 |
| 250M-2 | 55 | 75 | 100.7 | 2960 | 93.2 | 0.89 | 7.6 | 2.2 | 2.3 | 1.0 | 91 |
| 280S-2 | 75 | 100 | 136.5 | 2960 | 93.8 | 0.89 | 6.9 | 1.8 | 2.3 | 0.9 | 93 |
| 280M-2 | 90 | 125 | 163.3 | 2960 | 94.1 | 0.89 | 6.9 | 1.8 | 2.3 | 0.9 | 93 |
| 315S-2 | 110 | 150 | 196.9 | 2970 | 94.3 | 0.90 | 7.0 | 1.8 | 2.2 | 0.9 | 94 |
| 315M-2 | 132 | 180 | 235.6 | 2970 | 94.6 | 0.90 | 7.0 | 1.8 | 2.2 | 0.9 | 94 |
| 315L1-2 | 160 | 215 | 281.8 | 2970 | 94.8 | 0.91 | 7.1 | 1.8 | 2.2 | 0.9 | 94 |
| 315L2-2 | 200 | 270 | 351.5 | 2970 | 95.0 | 0.91 | 7.1 | 1.8 | 2.2 | 0.8 | 94 |
| 355M-2 | 250 | 340 | 439.4 | 2970 | 95.0 | 0.91 | 7.1 | 1.6 | 2.2 | 0.8 | 102 |
| 355L-2 | 315 | 420 | 553.6 | 2970 | 95.0 | 0.91 | 7.2 | 1.6 | 2.2 | 0.8 | 102 |
| 3551-2 | 355 | 623.9 | 623.9 | 2970 | 95.0 | 0.91 | 7.2 | 1.6 | 2.2 | 0.7 | 106 |
| 3552-2 | 375 | 659.1 | 659.1 | 2970 | 95.0 | 0.91 | 7.2 | 1.6 | 2.2 | 0.7 | 106 |
| Synchronous speed 1500（r/min） | |||||||||||
| 80M1-4 | 0.55 | 0.75 | 1.38 | 1390 | 79.6 | 0.76 | 6.4 | 2.3 | 2.3 | 1.6 | 61 |
| 80M2-4 | 0.75 | 1 | 1.88 | 1390 | 79.6 | 0.76 | 6.4 | 2.3 | 2.3 | 1.6 | 61 |
| 90S-4 | 1.1 | 1.5 | 2.67 | 1390 | 81.4 | 0.77 | 6.6 | 2.3 | 2.3 | 1.6 | 64 |
| 90L-4 | 1.5 | 2 | 3.53 | 1390 | 82.8 | 0.78 | 6.7 | 2.3 | 2.3 | 1.6 | 64 |
| 100L1-4 | 2.2 | 3 | 4.96 | 1410 | 84.3 | 0.80 | 7.3 | 2.3 | 2.3 | 1.5 | 69 |
| 100L2-4 | 3 | 4 | 6.58 | 1410 | 85.5 | 0.81 | 7.5 | 2.3 | 2.3 | 1.5 | 69 |
| 112M-4 | 4 | 5.5 | 8.66 | 1435 | 86.6 | 0.81 | 7.5 | 2.3 | 2.3 | 1.5 | 70 |
| 132S-4 | 5.5 | 7.5 | 11.62 | 1440 | 87.7 | 0.82 | 7.5 | 2.0 | 2.3 | 1.4 | 76 |
| 132M-4 | 7.5 | 10 | 15.48 | 1440 | 88.7 | 0.83 | 7.3 | 2.0 | 2.3 | 1.4 | 76 |
| 160M-2 | 11 | 15 | 22.42 | 1460 | 89.8 | 0.83 | 7.4 | 2.0 | 2.3 | 1.4 | 78 |
| 160L-4 | 15 | 20 | 29.95 | 1460 | 90.6 | 0.84 | 7.5 | 2.0 | 2.3 | 1.4 | 78 |
| 180M-4 | 18.5 | 25 | 36.3 | 1470 | 91.2 | 0.85 | 7.6 | 2.0 | 2.3 | 1.2 | 80 |
| 180L-4 | 22 | 30 | 42.9 | 1470 | 91.6 | 0.85 | 7.7 | 2.1 | 2.3 | 1.2 | 80 |
| 200L-4 | 30 | 40 | 58.1 | 1470 | 92.3 | 0.85 | 7.1 | 2.1 | 2.3 | 1.2 | 80 |
| 225S-4 | 37 | 50 | 70.5 | 1475 | 92.7 | 0.86 | 7.3 | 2.1 | 2.3 | 1.2 | 81 |
| 225M-4 | 45 | 60 | 85.4 | 1475 | 93.1 | 0.86 | 7.3 | 2.2 | 2.3 | 1.1 | 81 |
| 250M-4 | 55 | 75 | 103.9 | 1480 | 93.5 | 0.86 | 7.3 | 2.2 | 2.3 | 1.1 | 82 |
| 280S-4 | 75 | 100 | 139.3 | 1480 | 94.0 | 0.87 | 6.8 | 2.2 | 2.3 | 1.0 | 83 |
| 280M-4 | 90 | 125 | 165.0 | 1480 | 94.2 | 0.88 | 6.9 | 2.2 | 2.3 | 1.0 | 83 |
| 315S-4 | 110 | 150 | 198.7 | 1480 | 94.5 | 0.89 | 6.9 | 2.1 | 2.2 | 1.0 | 91 |
| 315M-4 | 132 | 180 | 238.0 | 1480 | 94.7 | 0.89 | 6.9 | 2.1 | 2.2 | 1.0 | 91 |
| 315L1-4 | 160 | 215 | 284.6 | 1480 | 94.9 | 0.90 | 6.9 | 2.1 | 2.2 | 1.0 | 91 |
| 315L2-4 | 200 | 270 | 355.0 | 1480 | 95.1 | 0.90 | 6.9 | 2.1 | 2.2 | 0.9 | 91 |
| 355M-4 | 250 | 340 | 443.8 | 1490 | 95.1 | 0.90 | 6.9 | 2.0 | 2.2 | 0.9 | 97 |
| 355L-4 | 315 | 420 | 559.2 | 1490 | 95.1 | 0.90 | 6.9 | 2.0 | 2.2 | 0.8 | 97 |
| 3551-4 | 355 | 420 | 637.3 | 1490 | 95.1 | 0.89 | 6.5 | 1.7 | 2.2 | 0.8 | 104 |
| 3552-4 | 375 | 420 | 673.2 | 1490 | 95.1 | 0.89 | 6.5 | 1.7 | 2.2 | 0.8 | 104 |
| Synchronous speed 1000（r/min） | |||||||||||
| 90S-6 | 0.75 | 1 | 2.11 | 910 | 75.9 | 0.71 | 5.8 | 2.0 | 2.1 | 1.5 | 64 |
| 90L-6 | 1.1 | 1.5 | 2.97 | 910 | 781 | 0.72 | 5.9 | 2.0 | 2.1 | 1.3 | 64 |
| 100L-6 | 1.5 | 2 | 3.97 | 920 | 79.8 | 0.72 | 5.9 | 2.0 | 2.1 | 1.3 | 68 |
| 112M-6 | 2.2 | 3 | 5.68 | 935 | 81.8 | 0.72 | 6.2 | 2.0 | 2.1 | 1.3 | 72 |
| 132S-6 | 3.0 | 4 | 7.60 | 960 | 83.3 | 0.72 | 6.4 | 2.0 | 2.1 | 1.3 | 76 |
| 132M1-6 | 4.0 | 5.5 | 9.71 | 960 | 84.6 | 0.74 | 6.6 | 2.0 | 2.1 | 1.3 | 76 |
| 132M2-6 | 5.5 | 7.5 | 12.96 | 960 | 86.0 | 0.75 | 6.8 | 2.0 | 2.1 | 1.3 | 76 |
| 160M-6 | 7.5 | 10 | 16.75 | 970 | 87.2 | 0.78 | 6.8 | 2.0 | 2.1 | 1.3 | 80 |
| 160L-6 | 11 | 15 | 23.85 | 970 | 88.7 | 0.79 | 6.9 | 2.0 | 2.1 | 1.2 | 80 |
| 180L-6 | 15 | 20 | 31.0 | 970 | 89.7 | 0.82 | 7.3 | 2.0 | 2.1 | 1.2 | 79 |
| 200L1-6 | 18.5 | 25 | 38.9 | 980 | 90.4 | 0.80 | 7.2 | 2.0 | 2.1 | 1.2 | 79 |
| 200L2-6 | 22 | 30 | 45.4 | 980 | 90.9 | 0.81 | 7.3 | 2.0 | 2.1 | 1.2 | 79 |
| 225M-6 | 30 | 40 | 60.6 | 985 | 91.7 | 0.82 | 6.8 | 2.0 | 2.1 | 1.2 | 80 |
| 250M-6 | 37 | 50 | 73.5 | 980 | 92.2 | 0.83 | 7.0 | 2.0 | 2.1 | 1.2 | 82 |
| 280S-6 | 45 | 60 | 86.8 | 980 | 92.7 | 0.85 | 7.2 | 2.0 | 2.0 | 1.1 | 83 |
| 280M-6 | 55 | 75 | 104.4 | 980 | 93.1 | 0.86 | 7.2 | 2.0 | 2.0 | 1.1 | 83 |
| 315S-6 | 75 | 100 | 144.8 | 985 | 93.7 | 0.84 | 6.5 | 2.0 | 2.0 | 1.0 | 88 |
| 315M-6 | 90 | 125 | 171.1 | 985 | 94.0 | 0.85 | 6.6 | 2.0 | 2.0 | 1.0 | 88 |
| 315L1-6 | 110 | 150 | 208.5 | 985 | 94.3 | 0.85 | 6.6 | 2.0 | 2.0 | 1.0 | 88 |
| 315L2-6 | 132 | 180 | 246.5 | 985 | 94.6 | 0.86 | 6.6 | 2.0 | 2.0 | 1.0 | 88 |
| 355M1-6 | 160 | 215 | 298.2 | 990 | 94.8 | 0.86 | 6.7 | 2.0 | 2.0 | 1.0 | 89 |
| 355M2-6 | 200 | 270 | 371.9 | 990 | 95.0 | 0.86 | 6.8 | 2.0 | 2.0 | 0.9 | 89 |
| 355L-6 | 250 | 340 | 464.9 | 990 | 95.0 | 0.86 | 6.8 | 2.0 | 2.0 | 0.9 | 89 |
| 3552-6 | 315 | 340 | 585.8 | 990 | 95.0 | 0.86 | 6.8 | 2.0 | 2.0 | 0.8 | 95 |
